BENTLY NEVADA 330710-000-060-10-02-00 3300 XL11 MM PROXIMITY PROBE

Technical parameter

Input signal:

Support eddy current sensor, speed sensor or accelerometer input, the signal range is usually ±10 V to ±24 V.

Multi-channel data acquisition can be configured to support dynamic waveform and spectrum analysis.

Communication and interface:

Provides RS232, USB or Ethernet interfaces, support Modbus, TCP/IP and other protocols, easy integration with DCS or SCADA systems.

Part of the module built-in hardware integration function, direct output speed (unit: mm/s) or displacement.

Environmental adaptability

Operating temperature: -30°C to +65°C, storage temperature: -40°C to +85°C.

Protection class: IP67 (epoxy seal design, suitable for harsh industrial environments).

Power consumption and power supply

Typical power consumption: 8-10 W, support 24V DC power input.

Probe type: Proximity Probe

Probe diameter: usually 8 mm or 11 mm (the specific model is selected according to application requirements).

Linear range: Typical value is 2 mm (range depends on probe model).

Operating temperature: -40°C to +177°C, suitable for high temperature environment.

Output signal: -1 V to -18 V DC (linear with probe gap).

Protection grade: IP67, suitable for wet, oil and other harsh environment.

Functional characteristics

Real-time monitoring and alarm

Dynamic acquisition of vibration, displacement, speed and other parameters, support custom alarm threshold (such as alarm value, danger value), and output alarm signal through the relay module.

It works in Bypass Mode and Test Mode, facilitating maintenance and debugging.

Data integration and analysis

Real-time output of time domain waveform, frequency spectrum and multi-band amplitude data provides a basis for fault diagnosis.

Compatible with Bently Nevada configuration software (such as 3500/01 framework configuration software), supports remote configuration and parameter adjustment.

Redundancy and reliability

The modular design supports redundant configurations (such as 2-out-of-2 or 2-out-of-3 voting systems) to meet the requirements of API 670/612 for overspeed protection.

Application scenario

Energy industry

Power plant: Monitor vibration and axial displacement of gas, steam and water turbines to prevent downtime due to mechanical failure.

Oil and gas: Used for health monitoring of compressors and pump units, warning of bearing wear or rotor imbalance problems.

Manufacturing and heavy industry

Steel, cement industry: Monitoring the vibration state of fans and gear boxes to optimize the maintenance cycle.

Chemical and process industry: Ensure the stable operation of critical equipment such as reactors and centrifuges.

High-end equipment field

Aerospace: Performance monitoring of turbine engines on test benches.

Marine: real-time protection of mechanical condition of propulsion systems.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]