BENTLY NEVADA 330706-005-046-10-02-00 3300 XL 11 MM REVERSE MOUNT PROXIMITY PROBE

Technical parameter

Model: 330706 (3300 XL 11 mm reverse mounted probe).

Thread option (005) : 3/8-24 UNF thread

Housing length (046) : 46 mm (4.6 cm), reverse mount designs are usually shorter, but this length is slightly longer than common reverse mount probes.

Total length (10) : 1.0 m (3.3 ft).

Connector and Cable type (02) : Miniature coaxial ClickLoc connector, standard cable.

Institutional Certification (00) : No special certification (such as CSA or ATEX), suitable for general purpose environments.

Sensitivity: 8 mV/μm (typical value, based on 3300 XL 11 mm system).

Linear range: 2 mm (80 mil), from about 0.25 mm (10 mil) to 2.25 mm (90 mil).

Frequency response: 0 Hz to 10 kHz (for dynamic vibration measurement).

Temperature range:

Operating temperature: -52°C to +177°C (-62°F to +350°F).

Storage temperature: -52°C to +177°C (-62°F to +350°F).

Probe tip material: polyphenylene sulfide (PPS).

Probe housing material: AISI 304 stainless steel.

Weight: Approx. 0.070 kg (2.5 oz) (minimum length housing, 1 meter cable, no consideration of long housing impact).

Connector: Gold plated brass-plated ClickLoc connector.

Feature

Non-contact measurement: Eddy current technology is used to measure the distance between the probe and the target surface to avoid mechanical contact damage.

High precision vibration and position detection: static position and dynamic vibration can be measured for fluid film bearing machines.

Wide temperature adaptability: stable operation at extreme temperatures.

System compatibility: Fully interchangeable with other components of the 3300 XL series, such as extension cables and Proximitor sensors.

Anti-mounting design: easy to install from inside the device, suitable for space-limited scenarios.

Seal design: The probe has a built-in Viton O-ring, which seals the pressure difference between the probe tip and the housing.

Flexible mounting: The 3/8-24 UNF thread adapter is suitable for equipment requiring inch threads, and the 46 mm housing length is suitable for specific mounting depths.

Application scenario

Rotating machinery monitoring:

Turbines (gas turbines, steam turbines) : Measuring shaft vibration and position.

Compressor: Monitor bearing and housing vibration to prevent failure.

Motors and generators: Ensure smooth operation and extend equipment life.

General industrial environment:

Suitable for non-hazardous areas (without special certification), such as manufacturing plants, equipment workshops, etc.

Reverse mounting:

Suitable for installation from the inside of the equipment, such as the bearing housing or the inside of the housing with limited space.

Manufacturing Industry:

Used for vibration and position monitoring of gear box, pump, fan and other equipment.

Key phase reference and speed measurement:

Keyphasor signals are provided for speed and phase analysis.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]