BENTLY NEVADA 330705-02-18-90-02-05 3300 XL 11 MM PROXIMITY PROBE

Technical parameter

Model: 330705 (3300 XL 11 mm reverse mounted probe).

Thread option (02) : M10 x 1 thread.

Housing length (18) : 18 mm (1.8 cm), inversely mounted designs are usually shorter.

Total length (90) : 9.0 m (29.5 ft).

Connector and Cable type (02) : Miniature coaxial ClickLoc connector, standard cable.

Option (05) : FluidLoc cable option to enhance the resistance of the cable to liquid penetration, suitable for wet or submerged environments.

Sensitivity: 8 mV/μm (typical value, based on 3300 XL 11 mm system).

Linear range: 2 mm (80 mil), from about 0.25 mm (10 mil) to 2.25 mm (90 mil).

Frequency response: 0 Hz to 10 kHz (for dynamic vibration measurement).

Temperature range:

Operating temperature: -52°C to +177°C (-62°F to +350°F).

Storage temperature: -52°C to +177°C (-62°F to +350°F).

Probe tip material: polyphenylene sulfide (PPS).

Probe housing material: AISI 304 stainless steel.

Weight: Approx. 0.070 kg (2.5 oz) (minimum length housing, not counting long cable weight).

Cable length additional weight: 9 meters of cable increases about 0.035 kg/m, the total weight is about 0.385 kg.

Connector: Gold plated brass-plated ClickLoc connector.

Feature

Non-contact measurement: Eddy current technology is used to measure the distance between the probe and the target surface to avoid mechanical contact damage.

High precision vibration and position detection: static position and dynamic vibration can be measured for fluid film bearing machines.

Wide temperature adaptability: stable operation at extreme temperatures.

The FluidLoc Cable Enhancement: 05 configuration provides additional cable protection to prevent liquids (such as oil or water) from seeps along the cable into the connector or system.

System compatibility: Fully interchangeable with other components of the 3300 XL series, such as extension cables and Proximitor sensors.

Anti-mounting design: easy to install from inside the device, suitable for space-limited scenarios.

Long cable design: 9 m cable is suitable for the probe and monitoring system at a longer distance.

Seal design: The probe has a built-in Viton O-ring, which seals the pressure difference between the probe tip and the housing.

Application scenario

Rotating machinery monitoring:

Turbines (gas turbines, steam turbines) : Measuring shaft vibration and position.

Compressor: Monitor bearing and housing vibration to prevent failure.

Motors and generators: Ensure smooth operation and extend equipment life.

General industrial environment:

Suitable for non-hazardous areas (without special certification), such as manufacturing plants, equipment workshops, etc.

Wet or oil-soaked environments:

FluidLoc cables are designed to be particularly suitable for equipment exposed to liquids such as lubricating oil or water, such as pumps, gearboxes or Marine machinery.

Remote monitoring:

The 9 m cable length is suitable for scenarios where the probe and monitoring system are installed at a long distance.

Reverse mounting:

Suitable for installation from the inside of the equipment, such as the bearing housing or the inside of the housing with limited space.

Key phase reference and speed measurement:

Keyphasor signals are provided for speed and phase analysis.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]