BENTLY NEVADA 330525-01 VELOMITOR PIEZO-VELOCITY SENSOR

Technical parameter

Sensitivity: 100 mV/in/s (3.94 mV/mm/s), ±5% (calibrated at 100 Hz).

Frequency range: 4.5 Hz to 5 kHz (±3 dB).

Speed range: 1270 mm/s (50 in/s) peak.

Measuring range: 0 to 50.8 mm/s (0 to 2 in/s) RMS (typical value).

Temperature range:

Operating temperature: -55°C to +121°C (-67°F to +250°F).

Storage temperature: -55°C to +150°C (-67°F to +302°F).

Mounting: No specific thread options (usually directly mounted or via an adapter).

Agency Certification: -01 configurations typically include CSA, ATEX, etc., for hazardous areas.

Weight: Approximately 0.156 kg (5.5 oz).

Case material: 316L stainless steel, corrosion resistant.

Electrical connection: 2-pin MIL-C-5015 connector, waterproof design.

Maximum mounting torque: 45 N-m (33 ft-lb).

Minimum bending radius: 38.1 mm (1.5 in).

Power requirements: No external power supply (piezoelectric self-powered design).

Feature

High precision vibration measurement: Covering the frequency range of 4.5 Hz to 5 kHz, it can detect a variety of vibration signals such as low frequency unbalance and high frequency bearing failure.

Rugged waterproof design: 316L stainless steel housing and waterproof connectors, IP-65 and NEMA 4X standard, suitable for wet or dusty environments.

Solid state design: no moving parts, strong durability, support any Angle installation.

Speed signal output: the acceleration signal is converted into speed signal, which is easy to integrate with the monitoring system.

Resistance to environmental interference: It can operate stably in high temperature, high humidity or corrosive environment.

Application scenario

Rotating machinery monitoring:

Turbines (gas turbines, steam turbines) : Monitoring bearing and housing vibration to prevent failures.

Compressors: Detect vibration of rolling bearings to identify early wear or lubrication problems.

Motors and generators: Ensure smooth operation and extend equipment life.

Petrochemical industry:

Applicable to dangerous areas such as oil refineries and chemical plants, to meet the requirements of explosion-proof certification.

Power industry:

Condition monitoring of hydropower, wind power and thermal power equipment to ensure continuous power supply.

Manufacturing Industry:

Pumps, fans and gearboxes on the production line to optimize maintenance schedules and reduce downtime.

Harsh environment:

CSA and ATEX certified for safe operation in humid, dusty or explosive gas environments.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]