BENTLY NEVADA 330500-02-CN VELOMITOR PIEZO-VELOCITY SENSOR

Technical parameter

Sensitivity: 100 mV/in/s (4 mV/mm/s), ±5% (calibrated at 100 Hz).

Frequency range: 4.5 Hz to 5 kHz (±3 dB), suitable for most mechanical vibration detection.

Measuring range: 0 to 50.8 mm/s (0 to 2 in/s) RMS.

Temperature range:

Operating temperature: -55°C to +121°C (-67°F to +250°F).

Storage temperature: -55°C to +150°C (-67°F to +302°F).

Install the threaded adapter: 1/4-28 UNF (-02 configuration).

Certification: Multiple certifications (-CN), including CSA (Canadian Standards Association), ATEX (European Explosion-Proof Certification), etc., for hazardous areas.

Weight: Approx. 0.14kg (without cable).

Case material: stainless steel, corrosion resistant, suitable for harsh industrial environment.

Electrical connection: 2-pin MIL-C-5015 connector.

Maximum acceleration: 250 g (peak).

Power requirements: No external power supply (piezoelectric self-powered design).

Feature

High sensitivity vibration measurement: Captures subtle vibration signals for early failure detection.

Wide frequency response: Covering a frequency range of 4.5 Hz to 5 kHz, multiple vibration types can be monitored, including low frequency unbalance and high frequency bearing failure.

Rugged: Stainless steel housing and solid state design enable stable operation in high temperature, high humidity or corrosive environments.

Integrated electronic components: The built-in circuit converts the acceleration signal into the speed signal, and the output is easy to integrate with the monitoring system.

Easy installation: Supports a variety of installation methods (such as bolt fixation), suitable for different device surfaces.

Compatibility: Seamless integration with Bently Nevada 3500 Series monitoring systems or other systems that support speed signal input.

Application scenario

Rotating machinery monitoring:

Turbines (steam turbines, gas turbines) : Monitor bearing vibration to prevent failure due to unbalance or misalignment.

Compressors: Detect vibration of rolling bearings to identify early wear or lubrication problems.

Motors and generators: Ensure smooth operation and extend equipment life.

Petrochemical industry:

Critical equipment used in refineries and chemical plants to meet explosion-proof requirements such as ATEX.

Power industry:

Condition monitoring of hydropower, wind power and thermal power equipment to ensure continuous power supply.

Manufacturing Industry:

Pumps, fans and gearboxes on the production line to optimize maintenance schedules and reduce downtime.

Hazardous environment:

CSA and ATEX certified for safe operation in explosive gas or dust environments.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]