BENTLY NEVADA 330105-02-12-20-02-05 3300 XL FAMILY 8MM PROXIMITY PROBE

Technical parameter

Series: 3300 XL 8mm proximity probe

Probe length: 20mm (from probe tip to thread end)

Total length: 5.0 m (total cable length)

Installation options: unarmored cable, standard coaxial cable

Connector type: ClickLoc Coaxial connector

Certification: No special agency certification requirements

Operating temperature: -51°C to +177°C (probe tip)

Linear range: 2mm (80 mils), accuracy ±0.025mm

Frequency response: 0 Hz to 10 kHz (-3 dB)

Power supply voltage: -24 VDC (provided by matching Proximitor)

Output signal: -1 V/mm (-25.4mV /mil)

Protection Class: IP68 (probe part)

Weight: Approx. 0.45kg (including 5.0m cable)

Feature

High precision vibration and displacement measurement

With a linear accuracy of ±0.025mm and a frequency response of up to 10 kHz, it accurately captures shaft vibration and displacement changes of high-speed rotating equipment.

Real-time condition monitoring

In conjunction with the Bently Nevada monitoring system (such as the 3500 series), the signal output delay of <5ms ensures rapid response to equipment anomalies.

Strong environmental adaptability

Operating temperature range -51°C to +177°C, IP68 protection class, suitable for high temperature, high humidity or corrosive environment, to ensure long-term stable operation.

Easy installation and integration

ClickLoc connector design, installation time <2 minutes, support a variety of Proximitor and monitoring systems seamless connection.

Fault early warning

Continuously monitor shaft displacement and vibration trends, detect anomalies (such as amplitude exceeding ±10%), and provide early warning to reduce the risk of unplanned downtime.

Application scenario

Power generation industry - Reduce downtime costs

Pain point: Small gas turbine due to vibration abnormal shutdown, loss of up to tens of thousands of yuan per hour.

Solution: 330105-02-12-20-02-05 provides ±0.025mm precision monitoring, predicting faults 24-48 hours in advance, reducing unplanned downtime by 90% and saving costs.

Oil and Gas industry - Adapted to long distance requirements

Pain points: The installation space of small pumps in oil fields is limited, and the distance between the monitoring point and the control room is far.

Solution: 20mm short probe combined with 5.0m cable, real-time monitoring of displacement (10 kHz response), fault detection time reduced to 1 day, availability increased to 99%.

Petrochemical industry - Ensure safe operation

Pain point: The vibration of the compact pump exceeds the standard (>8 mm/s), which can easily cause the risk of leakage.

Solution: High precision measurement (±0.025mm) to control vibration within 6 mm/s, reducing 80% of safety risks.

Manufacturing - Optimize production efficiency

Pain point: The efficiency of small motors in the production line decreased by 20% due to maintenance lag.

Solution: The probe is integrated into the monitoring system, reducing the predicted maintenance cycle by 30% and increasing the efficiency to more than 95%.

Differentiation advantage

Ultra-high accuracy: linear accuracy ±0.025mm, 50% higher than similar products (usually ±0.05mm), reducing the false alarm rate by 30%.

Compact design: The 20mm probe length is 80% shorter than the conventional model (common 100mm+), suitable for space-constrained scenarios, and 50% more flexible installation.

Long cable design: 5.0m cables are more suitable for remote installation than conventional models (common 1.0m-2.0m), with 50% greater flexibility.

Wide temperature adaptability: -51°C to +177°C, more resistant to extreme conditions than competing products (generally -40°C to +125°C), 25% longer life.

Efficient installation: ClickLoc connectors take less than 2 minutes to install, which is 70% faster than threaded connections and saves 15% in labor costs.

Conclusion

The Bently Nevada 330105-02-12-20-02-05 proximity probe, with its high accuracy, compact design and long cable characteristics, provides an excellent solution for condition monitoring of rotating machinery. It addresses industry pain points such as high downtime costs, long-distance monitoring needs, and significantly improves equipment reliability and productivity through real-time data and early warning.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]