BENTLY NEVADA 330104-13-20-10-02-05 3300 XL FAMILY 8MM PROXIMITY PROBE

Technical parameter

Series: 3300 XL 8mm proximity probe

Probe length: 130mm (from probe tip to thread end)

Total length: 2.0 m (total cable length)

Installation options: unarmored cable, standard coaxial cable

Connector type: ClickLoc Coaxial connector

Certification: Multiple certification (in accordance with CSA, ATEX and other standards, suitable for hazardous areas)

Operating temperature: -51°C to +177°C (probe tip)

Linear range: 2mm (80 mils), accuracy ±0.025mm

Frequency response: 0 Hz to 10 kHz (-3 dB)

Power supply voltage: -24 VDC (provided by matching Proximitor)

Output signal: -1 V/mm (-25.4mV /mil)

Protection Class: IP68 (probe part)

Weight: Approx. 0.35kg (including 2.0m cable)

Feature

High precision vibration and displacement measurement: linear accuracy ±0.025mm, frequency response up to 10 kHz, can accurately detect shaft vibration and displacement changes of high-speed rotating equipment.

Real-time condition monitoring: Integrated with the Bently Nevada monitoring system (such as the 3500 series), the signal output delay is <5ms, ensuring rapid response to equipment anomalies.

Excellent environmental adaptability: Operating temperature range -51°C to +177°C, IP68 protection grade, suitable for high temperature, high humidity or corrosive environment, maintain long-term stability.

Easy installation and integration :ClickLoc connector design, installation time <2 minutes, supports seamless connection of multiple Proximitor and monitoring systems.

Early warning of failure: Continuous monitoring of shaft displacement and vibration trends, detection of anomalies (such as amplitude exceeding ±10%), early warning, reduce the risk of unplanned downtime.

Application scenario

Power generation industry - Reduce downtime costs

Pain point: Abnormal shutdown of gas turbine due to vibration, loss of up to 150,000 yuan per hour.

Solution: 330104-13-20-10-02-05 provides ±0.025mm precision monitoring, predicts faults 24-48 hours in advance, reduces 90% unplanned downtime, and saves about 6 million yuan annually.

Oil and Gas industry - Meeting explosion protection needs

Pain points: Offshore drilling platform compressors operate in explosive environments, and the lack of certification of conventional probes can lead to compliance issues.

Solution: The probe is CSA/ATEX certified to monitor displacement in real time (10 kHz response), reducing fault detection time to 1 day and increasing availability to 99%.

Petrochemical Industry - Improve safety and compliance

Pain point: excessive vibration of the refinery pump (>8 mm/s) leads to the risk of leakage and needs to meet the hazardous area standards.

Solution: High precision measurement (±0.025mm) to control vibration within 6 mm/s, reducing safety hazards by 80%, while meeting ATEX requirements.

Manufacturing - Optimize production efficiency

Pain point: The efficiency of the production line motor is reduced by 20% due to untimely maintenance.

Solution: The probe is integrated into the monitoring system, reducing the predicted maintenance cycle by 30% and increasing the efficiency to more than 95%.

Differentiation advantage

Ultra-high accuracy: linear accuracy ±0.025mm, 50% higher than similar products (usually ±0.05mm), reducing the false alarm rate by 30%.

Wide temperature adaptability: -51°C to +177°C, more resistant to extreme conditions than competing products (generally -40°C to +125°C), 25% longer life.

Certification advantages: Support CSA/ATEX multiple certification, more suitable for dangerous areas than non-certified competitors, compliance increased by 100%.

Low maintenance costs: IP68 protective design, maintenance period is 50% longer than traditional probes (from 1 to 1.5 years).

Efficient installation: ClickLoc connectors take less than 2 minutes to install, which is 70% faster than threaded connections and saves 15% in labor costs.

Conclusion

The Bently Nevada 330104-13-20-10-02-05 proximity probe provides an excellent solution for condition monitoring of rotating machinery with its high accuracy, durability and multiple certification features. It addresses industry pain points such as high downtime costs, safety and compliance risks, and significantly improves equipment reliability and productivity through real-time data, early warning, and hazard-area adaptation.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]