BENTLY NEVADA 330104-13-20-10-02-00 3300 XL FAMILY 8MM PROXIMITY PROBE

Technical parameter

Series: 3300 XL 8mm proximity probe

Probe length: 130mm (from probe tip to thread end)

Total length: 2.0 m (total cable length)

Installation options: unarmored cable, standard coaxial cable

Connector type: ClickLoc Coaxial connector

Certification: No special agency certification requirements

Operating temperature: -51°C to +177°C (probe tip)

Linear range: 2mm (80 mils), accuracy ±0.025mm

Frequency response: 0 Hz to 10 kHz (-3 dB)

Power supply voltage: -24 VDC (provided by matching Proximitor)

Output signal: -1 V/mm (-25.4mV /mil)

Protection Class: IP68 (probe part)

Weight: Approx. 0.35kg (including 2.0m cable)

Feature

High precision vibration and displacement measurement

With a linear accuracy of ±0.025mm and a frequency response of up to 10 kHz, shaft vibration and displacement changes of high-speed rotating equipment can be accurately detected.

Real-time condition monitoring

Used in conjunction with the Bently Nevada monitoring system (such as the 3500 series), the signal output delay is <5ms, and the device anomalies are quickly responded to.

Excellent environmental adaptability

Operating temperature range -51°C to +177°C, IP68 protection class, suitable for high temperature, high humidity or corrosive environment, to ensure long-term stable operation.

Easy installation and integration

ClickLoc connector design, installation time <2 minutes, support a variety of Proximitor and monitoring systems seamless connection.

Fault early warning

Continuously monitor shaft displacement and vibration trends, detect anomalies (such as amplitude exceeding ±10%), and provide early warning to reduce the risk of unplanned downtime.

Application scenario

Power generation industry - Reduce downtime costs

Pain point: Turbine abnormal shutdown due to shaft vibration, loss of up to 120,000 yuan per hour.

Solution: 330104-13-20-10-02-00 provides ±0.025mm precision monitoring, predicts faults 24-48 hours in advance, reduces unplanned downtime by 90%, and saves annual cost about 5.5 million yuan.

Oil and Gas Industry - Extended equipment life

Pain point: The maintenance cycle of the centrifugal pump is as long as 18 days because the abnormal vibration is not found in time.

Solution: The probe monitors displacement in real time (10 kHz response), reducing fault detection time from 6 days to 1 day and increasing equipment availability to 99%.

Petrochemical industry - Improve safety

Pain point: compressor vibration exceeding the standard (>9 mm/s) is easy to cause pipeline leakage risk.

Solution: High precision measurement (±0.025mm) control vibration within 7 mm/s, reducing the probability of safety accidents by 80%.

Manufacturing - Improve production efficiency

Pain point: Production line motor efficiency decreased 22% due to maintenance lag.

Solution: The probe is integrated into the monitoring system, reducing the predicted maintenance cycle by 30% and increasing the efficiency to more than 95%.

Differentiation advantage

Excellent accuracy: linear accuracy ±0.025mm, 50% higher than similar products (usually ±0.05mm), reduce false positive rate by 30%.

Wide temperature range: -51°C to +177°C, more adaptable to extreme environments than competing products (generally -40°C to +125°C), 25% longer life.

Low maintenance costs: IP68 protective design, maintenance period is 50% longer than traditional probes (from 1 to 1.5 years).

Efficient installation: ClickLoc connectors take less than 2 minutes to install, which is 70% faster than threaded connections and saves 15% in labor costs.

Conclusion

The Bently Nevada 330104-13-20-10-02-00 proximity probe offers a reliable solution for condition monitoring of rotating machinery with its high accuracy, durability and ease of use. It addresses industry pain points such as high downtime costs, safety risks, and significantly improves equipment reliability and productivity through real-time data and early warning.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]