BENTLY NEVADA 330104-12-20-10-02-00 3300 XL FAMILY 8MM PROXIMITY PROBE

Technical parameter

Series: 3300 XL 8mm proximity probe

Probe length: 120mm (from probe tip to thread end)

Total length: 2.0 m (total cable length)

Installation options: unarmored cable, standard coaxial cable

Connector type: ClickLoc Coaxial connector

Certification: No special agency certification requirements

Operating temperature: -51°C to +177°C (probe tip)

Linear range: 2mm (80 mils), accuracy ±0.025mm

Frequency response: 0 Hz to 10 kHz (-3 dB)

Power supply voltage: -24 VDC (provided by matching Proximitor)

Output signal: -1 V/mm (-25.4mV /mil)

Protection Class: IP68 (probe part)

Weight: Approx. 0.35kg (including 2.0m cable)

Feature

High precision vibration and displacement measurement: linear accuracy of ±0.025mm, frequency response up to 10 kHz, can accurately capture the shaft vibration and displacement changes of high-speed rotating equipment.

Real-time condition monitoring: Integrated with the Bently Nevada monitoring system (such as the 3500 series), the signal output delay is <5ms, ensuring timely detection of equipment anomalies.

Strong environmental adaptability: Operating temperature range -51°C to +177°C, IP68 protection grade, suitable for extreme industrial environment, to maintain long-term stable operation.

Quick installation and compatibility :ClickLoc connector design, installation time <2 minutes, enables seamless connection of multiple Proximitor and monitoring systems.

Fault early warning: Continuous monitoring of shaft displacement and vibration, detection of anomalies (such as amplitude exceeding ±10%), early warning, reduce the risk of downtime.

Application scenario

Power generation industry - Reduce downtime losses

Pain point: The steam turbine stops due to excessive vibration, and the loss is up to 150,000 yuan per hour.

Solution: 330104-12-20-10-02-00 Provides ±0.025mm precision monitoring, predicts failure 24-48 hours in advance, reduces 85% unplanned downtime, and saves about 6 million yuan annually.

Oil and Gas Industry - Increased equipment life

Pain point: The maintenance cycle of centrifugal compressor due to bearing wear is up to 20 days.

Solution: The probe monitors displacement in real time (10 kHz response), reducing fault detection time from 7 days to 1 day and increasing equipment availability to 98%.

Chemical industry - Ensure production safety

Pain point: the pump vibration exceeds the standard (>8 mm/s) leading to the risk of pipeline leakage.

Solution: High precision measurement (±0.025mm) to control vibration within 6 mm/s, reducing 75% of safety hazards.

Manufacturing - Optimize maintenance efficiency

Pain point: The efficiency of the motor is reduced by 25% due to lack of timely maintenance.

Solution: The probe integrates the monitoring system, reducing the predicted maintenance cycle by 35% and restoring efficiency to more than 96%.

Differentiation advantage

Ultra-high accuracy: linear accuracy ±0.025mm, 50% higher than similar products (usually ±0.05mm), reducing the false alarm rate by 30%.

Wide temperature adaptability: -51°C to +177°C, more resistant to extreme conditions than competing products (generally -40°C to +125°C), 25% longer life.

Low maintenance requirements: IP68 protective design, maintenance period is 50% longer than traditional probes (from 1 to 1.5 years).

Installation efficiency: ClickLoc connectors take less than 2 minutes to install, which is 70% faster than threaded connections and saves 15% labor costs.

Conclusion

The Bently Nevada 330104-12-20-10-02-00 proximity probe offers an efficient solution for condition monitoring of rotating machinery with superior accuracy, durability and convenience. It addresses industry pain points such as high downtime costs, safety risks, and significantly improves equipment reliability and productivity through real-time data and early warning.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]