BENTLY NEVADA 330104-11-22-10-02-CN 3300 XL FAMILY 8MM PROXIMITY PROBE

Technical parameter

Series: 3300 XL 8mm proximity probe

Probe length: 110mm (from probe tip to thread end)

Total length: 2.2 m (total cable length)

Installation options: unarmored cable, standard coaxial cable

Connector type: ClickLoc Coaxial connector

Certification: China specific certification (e.g. CCC)

Operating temperature: -51°C to +177°C (probe tip)

Linear range: 2mm (80 mils), accuracy ±0.025mm

Frequency response: 0 Hz to 10 kHz (-3 dB)

Power supply voltage: -24 VDC (provided by matching Proximitor)

Output signal: -1 V/mm (-25.4mV /mil)

Protection Class: IP68 (probe part)

Weight: Approx. 0.3kg (including 2.2m cable)

Feature

High precision vibration and displacement measurement: provides linear accuracy of ±0.025mm and frequency response of 10 kHz to accurately capture shaft vibration and displacement changes, suitable for high-speed rotating equipment.

Real-time condition monitoring: Used in conjunction with Bently Nevada's monitoring system (such as the 3500 series), real-time output signals with a delay of <5ms ensure rapid response to equipment anomalies.

Durability and environmental adaptability: Operating temperature range -51°C to +177°C, IP68 protection class, suitable for high temperature, high humidity or corrosive environment, to ensure long-term stable operation.

Easy installation and integration: ClickLoc connector design, installation time <2 minutes, supports seamless integration with a variety of Proximitor and monitoring systems.

Early warning of failure: By continuously monitoring shaft displacement and vibration trends, detect anomalies (such as amplitude exceeding ±10%), early warning, and reduce unplanned downtime.

Application scenario

Power generation industry - High cost of resolving downtime

Pain point: The gas turbine stops due to bearing failure, and the loss can reach 100,000 yuan per hour.

Solution: 330104-11-22-10-02-CN Monitor shaft vibration (accuracy ±0.025mm), predict failure 24-48 hours in advance, reduce 90% unplanned downtime, annual cost savings of about 5 million yuan.

Oil and Gas Industry - Improve equipment reliability

Pain point: compressor seal failure due to abnormal vibration, maintenance cycle up to 15 days.

Solution: The probe monitors displacement in real time (response frequency 10 kHz), reducing fault detection time from 5 days to 1 day and increasing reliability to 99.5%.

Petrochemical industry - Ensure safe operation

Pain point: the vibration of pump equipment exceeds the standard (>7 mm/s), which is easy to cause leakage risk.

Solution: With high precision measurement (±0.025mm), the vibration is controlled within 5mm /s, reducing the probability of safety accidents by 80%.

Manufacturing - Optimize production efficiency

Pain point: The efficiency of the production line motor is reduced by 20% because it is not maintained in time.

Solution: The probe is integrated into the monitoring system, reducing the predicted maintenance cycle by 30% and increasing the efficiency to more than 95%.

Differentiation advantage

High precision and stability: linear accuracy ±0.025mm, 50% higher than similar products (generally ±0.05mm), reduce the false alarm rate by 30%.

Wide temperature range: -51°C to +177°C, better adapted to extreme environments than competing products (typically -40°C to +125°C), 20% longer life.

Low maintenance costs: IP68 protection and corrosion resistance design, maintenance period is 50% longer than traditional probes (from 1 year to 1.5 years).

Rapid deployment: ClickLoc connectors take less than 2 minutes to install, which is 70% faster than traditional threaded connections and reduces labor costs by 15%.

Conclusion

The Bently Nevada 330104-11-22-10-02-CN proximity probe provides a reliable solution for vibration and displacement monitoring of industrial rotating equipment with its high accuracy, durability and ease of use. It addresses industry pain points, such as high downtime costs and poor equipment reliability, with real-time data and early warning to significantly improve efficiency and safety.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]