BENTLY NEVADA 330104-00-08-10-01-CN 3300 XL FAMILY 8MM PROXIMITY PROBE

Technical parameter

System length: 5 or 9 meters (including extension cable) or 1 meter (probe only).

Power supply: no grid requirement -17.5Vdc to -26Vdc, current maximum 12mA.

Recommended gap setting value: 1.27mm.

Sensitivity (ISF) : 7.87V/mm (200mV/mil).

Frequency response: 0-10kHz, with a maximum length of 305 m field connection from 3300 XL preprocessor to monitor.

Probe operating temperature: standard probe -52 °C to + 177°C; High temperature probe -52 °C to + 218°C.

Extended cable temperature: Standard cable -52 °C to + 177°C; High temperature cable -52 °C to + 260°C.

Preprocessor operating temperature: -52°C to + 100°C.

Feature

Displacement measurement: It can accurately measure the distance change between the measured object and the probe, and can be used to monitor the displacement of the rotating mechanical shaft, and determine whether the shaft has deviated, channeling and other abnormal conditions.

Vibration monitoring: Through continuous measurement of displacement changes, the vibration information of the shaft can be obtained, such as vibration amplitude, frequency, etc., to help analyze the vibration state of the machinery, detect vibration anomalies in time, and prevent equipment failures.

Key phase detection: with the relevant equipment, the key phase position of the rotating machinery can be determined, which provides important phase information for the analysis of the operating state of the machinery and fault diagnosis, and helps to judge the imbalance, misalignment, loosening and other problems of the machinery.

Application scenario

Power plant: Used for shaft vibration and shaft displacement monitoring of large rotating equipment such as steam turbine and generator to ensure stable operation of equipment and prevent shutdown accidents caused by shaft system failure.

Oil refinery: In compressors, pumps and other equipment, monitoring shaft operation status, timely detection of potential equipment problems, to ensure the continuity and safety of the production process.

Chemical plant: Suitable for all kinds of rotating machinery, such as reaction kettle stirring shaft, fan shaft, etc., to provide guarantee for the stable operation of chemical production.

Steel plant: Used for shaft vibration and displacement measurement of rolling mill, fan, gear box and other equipment, which helps to find equipment faults in time, reduce maintenance time and cost, and improve production efficiency.

Pump factory and wind turbine factory: In the process of product production and testing, the shaft of the pump and fan are monitored for vibration and displacement to ensure that product quality and performance meet the requirements.

Advantage Products:

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Many Available just wait for you, feel free to ask to get better deal!!!

Bou L(Sales Manager)            

Tel:+86-175 5077 6091                                                                                              

E-mail:[email protected]       

Tina(Sales Specialist)       

Tel:+86-131 2336 8748                                                                                                            

E-mail:[email protected]     

Elaine(Sales Specialist)       

Tel:+86-185 5982 5148                                                                                                         

E-mail:[email protected]