MV156E-MCM ControlLogix Series Communication Module
The Allen Bradley MVI56E-MCM is a communication module designed for the ControlLogix series of programmable logic controllers (PLCs). This module enables the ControlLogix system to communicate with Modbus-compatible devices.
HS CODE : 8428909090
Product No :
MV156E-MCMManufacture :
Allen BradleySize (cm) :
13.2*3.6*10.5Weight (kg) :
0.227Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
Processor UnitKey Features:
Modbus Communication:
Provides Modbus RTU and Modbus TCP communication capabilities.
Allows the ControlLogix PLC to interface with Modbus devices for data exchange and control.
Protocol Support:
Supports both Modbus Master and Modbus Slave protocols.
Facilitates communication between ControlLogix and other Modbus-compatible devices and systems.
Configuration:
Configurable using the MVI56E Configuration Tool.
Allows users to set communication parameters, configure device addresses, and map data points.
High Performance:
Designed for high-speed communication and reliable data exchange.
Suitable for applications requiring robust Modbus communication capabilities.
Diagnostic Features:
Equipped with diagnostic indicators for monitoring communication status.
Provides error detection and reporting to aid in troubleshooting and maintenance.
Specifications:
Communication Type: Modbus RTU and Modbus TCP
Protocol Support: Master and Slave
Configuration Software: MVI56E Configuration Tool
Operating Temperature: 0 to 60 °C (32 to 140 °F)
Power Supply: Powered through the ControlLogix chassis
Mounting: Installs into a ControlLogix I/O module slot
Applications:
Integrates Modbus devices into ControlLogix PLC systems for industrial automation and control.
Used for interfacing with Modbus-compatible sensors, actuators, and other devices.
Suitable for manufacturing, process control, and other automation applications requiring Modbus communication.
Installation and Configuration:
Mounting:
Install the MVI56E-MCM module into an available slot in the ControlLogix chassis.
Ensure proper alignment and secure mounting within the chassis.
Wiring:
Connect the Modbus communication lines to the module’s terminals for RTU communication or network connections for TCP communication.
Follow proper wiring practices to ensure reliable communication.
Configuration:
Use the MVI56E Configuration Tool to set up communication parameters, device addresses, and data mapping.
Configure the module to match the requirements of the Modbus devices in your system.
Testing and Commissioning:
Verify installation and wiring connections.
Test the Modbus communication to ensure correct data exchange between the ControlLogix PLC and Modbus devices.
Monitor diagnostic indicators to confirm proper operation.
Maintenance:
Regularly inspect the module and connections for wear or damage.
Keep the module clean and ensure it remains properly mounted.
Address any communication issues or faults as needed.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
