KFD2-RSH-1.2E.L2 Relay Module

Function:

The KFD2-RSH-1.2E. L2 is a relay output module designed to control electrical loads in the safe area.  It is typically used to switch high-power devices such as motors, solenoids, or other actuators based on control signals from a PLC or other control systems.

Inputs:

The module receives low-power control signals from the control system.  These signals activate the internal relays, allowing the module to control higher power circuits.

Outputs:

The module features relay outputs, which are capable of switching higher power loads.

The relay configuration is typically SPDT (Single Pole Double Throw), providing both normally open (NO) and normally closed (NC) contacts for flexible control options.

Channels:

The model number "1.2" suggests that the module has dual channels, meaning it can control two separate circuits independently.

Power Supply:

The KFD2-RSH-1.2E. L2 operates on a 24 V DC power supply, standard for industrial automation environments.

Isolation:

The device provides galvanic isolation between the input control signals and the relay outputs.  This isolation protects the control system from electrical noise and potential faults on the output side.

Mounting:

The module is designed for DIN rail mounting, making it easy to install in control panels and integrate with other industrial control equipment.

Temperature Range:

The module is designed to operate within the standard industrial temperature range, ensuring reliable performance in a variety of environmental conditions.

Certifications:

The KFD2-RSH-1.2E. L2 is typically certified for use in hazardous areas, with certifications like ATEX and IECEx.  This makes it suitable for use in environments where explosive gases or dust may be present.

Diagnostic Features:

The module may include diagnostic LEDs that indicate the status of each relay and input signal, aiding in troubleshooting and system monitoring.

Safety Features:

The module likely includes features such as fail-safe operation, ensuring that the system reverts to a safe state in the event of a failure.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091