KFD2-RCI-1 Repeater Power
The KFD2-RCI-1 is a module from Pepperl+Fuchs, typically used in industrial automation settings. It serves as a repeater power supply with HART communication capabilities, making it a key component in systems that require isolated power supply and signal transmission.
HS CODE : 8428909090
Product No :
KFD2-RCI-1Manufacture :
Pepperl FuchsSize (cm) :
11.9*2*11.5Weight (kg) :
0.15Origin :
SingaporeWarranty :
12 MonthLead Time :
Ready StockDescription :
Processor UnitFunction: The KFD2-RCI-1 functions as a repeater power supply and provides isolated power to field devices, such as 2-wire transmitters. It allows bidirectional transmission of HART (Highway Addressable Remote Transducer) communication signals, making it ideal for systems that require both power and data transmission over the same wiring.
Input: The module is powered by a 24 V DC supply and receives input signals from the connected field device.
Output: It provides a 4-20 mA analog signal output that corresponds to the measured variable from the field device. The output is typically connected to a control system or monitoring equipment. Additionally, it supports HART communication signals superimposed on the analog signal.
Isolation: The device offers galvanic isolation between the input, output, and power supply, which is crucial for preventing interference and ensuring the safe operation of connected devices in hazardous environments.
Mounting: The KFD2-RCI-1 is designed for easy installation on a DIN rail, a common mounting method in control panels.
HART Communication: The module supports HART communication, allowing for remote configuration and diagnostics of connected field devices. This feature is particularly useful in complex process control systems where remote access to device parameters is required.
Temperature Range: The module is designed to operate within a standard industrial temperature range, ensuring it can withstand the typical environmental conditions found in process automation settings.
Certifications: The KFD2-RCI-1 is likely certified for use in hazardous areas, with certifications such as ATEX, IECEx, or similar. This makes it suitable for use in environments where explosive gases or dust may be present.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
