KFD0-RSH-1.4S.PS2 Specialized Relay Module

Function:

The KFD0-RSH-1.4S. PS2 is a relay output module that is designed to switch loads in the safe area.  It is typically used to control high-power devices like motors, actuators, or lighting systems based on low-power control signals from a control system or a PLC (Programmable Logic Controller).

Input:

The module accepts a low-power control signal to operate the relay.  This control signal can be sourced from a variety of devices within the control system.

Output:

The module features multiple relay outputs (typically four, as suggested by the "1.4" in the model number), allowing it to switch multiple circuits.

Each relay is capable of controlling separate circuits, which can be configured as normally open (NO) or normally closed (NC) depending on the application requirements.

Power Supply:

The KFD0-RSH-1.4S. PS2 is powered by a 24 V DC supply, which is standard for industrial control equipment.

Isolation:

The device provides galvanic isolation between the input signals and the relay outputs.  This isolation helps protect the control system from electrical noise and potential damage due to faults in the load circuits.

Mounting:

The module is designed for DIN rail mounting, which is the standard for most industrial control panels, allowing for easy installation and integration into existing systems.

Temperature Range:

The module is designed to operate reliably within the standard industrial temperature range, ensuring consistent performance even in challenging environments.

Certifications:

The KFD0-RSH-1.4S. PS2 is typically certified for use in hazardous areas with certifications such as ATEX, IECEx, or similar, making it suitable for use in environments where explosive gases or dust may be present.

Safety Features:

The module is likely to include safety features such as fail-safe operation, ensuring that in the event of a failure, the system reverts to a safe state.

Diagnostic Features:

The module may be equipped with diagnostic LEDs that indicate the status of each relay and input signal, simplifying troubleshooting and maintenance.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091