KFD0-RO-2 Relay Output Module

Function:

The KFD0-RO-2 is a relay output module that allows a control system, such as a PLC, to control electrical loads by switching them on or off. It is typically used to manage devices like motors, actuators, solenoids, or lighting.

Input:

The module receives a control signal, typically 24 V DC, from a control system. This signal triggers the relay within the module, allowing it to control the connected load.

Output:

The KFD0-RO-2 features two relay outputs, which are used to switch electrical circuits in the safe area. Each relay is typically of the SPDT (Single Pole Double Throw) type, providing both normally open (NO) and normally closed (NC) contacts.

The relays are capable of switching higher power loads, making them suitable for controlling various industrial equipment.

Channels:

The module is a dual-channel device, meaning it can independently control two separate circuits.

Power Supply:

The KFD0-RO-2 is powered by a 24 V DC power supply, which is standard in most industrial settings.

Isolation:

The module provides galvanic isolation between the input control signals and the relay outputs. This isolation helps protect the control system from electrical noise and potential faults in the output circuits.

Mounting:

The KFD0-RO-2 is designed for DIN rail mounting, allowing easy installation and integration into control panels.

Temperature Range:

The module is designed to operate within a standard industrial temperature range, ensuring consistent performance under various environmental conditions.

Certifications:

The KFD0-RO-2 is typically certified for use in hazardous areas, with certifications such as ATEX and IECEx, making it suitable for environments where explosive gases or dust may be present.

Diagnostic Features:

The module include diagnostic LEDs that indicate the status of each relay and input signal, which can simplify troubleshooting and maintenance.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091