IC694MDL645 PACSystem RX3i Discrete Input Module
The IC694MDL645 is a PACSystem RX3i Discrete Input module formerly manufactured by GE Fanuc, now under Emerson Automation. This module features Sixteen (16) 24VDC input channels that support Positive or Negative logic wiring configuration with One (1) group of input channels. It accepts 0-30 VDC input voltage range with nominal voltage of 24 VDC and input current of 7 mA at rated voltage. This module has backplane current draw of 80 mA @ 5VDC and 125 mA from isolated 24 VDC backplane or externally installed power supply.
HS CODE : 8428909090
Product No :
IC694MDL645Manufacture :
General ElectricSize (cm) :
13*13*3Weight (kg) :
0.45Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleThe IC694MDL645 is a digital input module from the PACsystem RX3i series of Emerson Automation, formerly GE Intelligent Platforms (GE IP). This input module is designed with Sixteen (16) input channels that are compatible for Positive or Negative logic wiring. This module has a single group of inputs and a single common terminal. Each input channels is designed to receive an input voltage range of 0-30 VDC input range and rated voltage of 24 VDC. Each input channel has ON state voltage of 11.5 - 30 VDC and Off-state voltage of 0-5VDC while the minimum input current is 3.2 mA and maximum input current of 1.1 mA. The module has typical response time of 7 ms per channel with power consumption of 80 mA @ 5VDC and 125 mA @ 24VDC backplane bus or externally supplied voltage. This module also comes with continuous isolation rating of 250 VAC and 1500 VAC for 1 minute. This isolation is from Filed to backplane, also known as optical isolation and frame to ground isolation. The IC694MDL645 can be installed as local output module component of an RX3i system as well as distributed I/O component of the same system. Additionally, it supports RX7i systems, functions as distributed I/O only. Sixteen (16) output LEDs are also available to this module which represents each input channel. An active input channels will have it corresponding LED energized otherwise, the LED remains de-energized. This module is especially compatible for use with On/Off devices such as switches, pushbutton devices, proximity sensors and auxiliary contacts.
The GE Fanuc IC694MDL645 Input Module from the RX3i PacSystem series has a rated voltage of 24 Volts DC (with positive or negative logic), an input current of 7 milliamps, an input voltage range between 0 and 30 Volts DC, and a power consumption rating of 80 milliamps from the 5 Volts bus source and one of 125 milliamps from a 24 Volts supply. It is available with 16 input points, all of which are arranged in a single group with a shared power input terminal. It is wired for either negative or positive logic. The GE Fanuc IC694MDL645 Input Module has various input characteristics such as an on-state voltage between 11.5 and 30 Volts DC, an off-state voltage from 0 to 5 Volts DC, an on-state current of 3.2 milliamps minimum, an off-state current of 1.1 milliamps maximum, an on-state response time of 7 milliseconds on average, and an off-state response time of 7 milliseconds on average. These characteristics make the GE Fanuc IC694MDL645 Input Module compatible with limit switches, electronic proximity switches, and pushbuttons. The field input devices are powered from the 24 Volts OUT and the 0 Volts OUT module terminals. In addition, the field devices can also be powered from an external source. The GE Fanuc IC694MDL645 Input Module has 16 green LEDs that display the on and off status of the module’s 16 input points. This module is a low-voltage module and this is signified by 2 blue bands at the top and bottom of the module label. The IC694MDL645 Input Module has an operating temperature between 32 and 140 degrees Fahrenheit and a storage temperature range between -40 and 185 degrees Fahrenheit. It has a non-condensing tolerable humidity range of 5% to 95%.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
Conditions |
Original Brand New |
Approximate Lead Time |
3-5 days |
Warranty |
One Year |
Online Service |
7/24 |
Express Company |
DHL / FedEx / UPS / TNT etc. |
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies