PLC ENGINEERING

IC694BEM320 Link Network Interface Module

Home

GE Funac

IC694BEM320 Link Network Interface Module

IC694BEM320 Link Network Interface Module

The GE Fanuc IC694BEM320 I/O Link Network Interface Module allows for the connection of nodes into a central processing unit or PLC using the I/O Link industrial networking protocol to send and receive data. Two selectable sets of data from either 32 or 64 inputs can be configured by using jumper wires.

HS CODE : 8428909090

  • Product No :

    IC694BEM320
  • Manufacture :

    General Electric
  • Size (cm) :

    13*13*3
  • Weight (kg) :

    1.5
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Module

The GE Fanuc IC694BEM320 I/O Link Network Interface Module is a member of the RX3i product family that operates as a slave processor in a GE Fanuc I/O Link network system. Once installed in the network, this module is able to interchange data with a master device and it has a selectable number of inputs that varies between 32 and 64 according to the user’s application needs. Many different type of master processors are compatible with the GE Fanuc IC694BEM320 I/O Link Network Interface Module such the GE Fanuc PLCs from Series 90-30 and 90-70, PACSystems devices, GE Fanuc Series 15, 16, and 18 CNCs, Model C CNCs or even GE F-D Mate CNCs.

There is no limit to the number of IC694BEM320 I/O Link Network Interface Modules that can be connected to a single master processor, and the only requirement for connecting them is that there must be enough room for additional power connections to power them all. The module is powered directly from the receiving system backplane, and in most of the systems from GE Fanuc, this power source operates at 5 Volts DC. There are 2 serial communication ports on the front of the GE Fanuc IC694BEM320 I/O Link Network Interface Module and they are compatible with the RS485 and RS422 protocols. The selection of the number of I/O Link connection points to use (32 or 64 inputs) can be easily made by using jumper wires that are located inside the module cover. The open construction of this module means it should not be placed in humid places or exposed to extreme high or low temperatures.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091

 

 

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

 7/24

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

IC693CPU311 GE
IC693CPU311 GE Fanuc 90-30 CPU Base
IC693CPU311 is a 5-slot embedded CPU baseplate manufactured by GE Fanuc that belongs to the Series 90-30 mid-range CPU family. HS CODE : 8538909200
More +
IC693CPU313 BASE
IC693CPU313 GE Fanuc 90-30 CPU Base
IC693CPU313 is an embedded CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU323 FANUC
IC693CPU323 GE Fanuc 90-30 CPU Base
IC693CPU323 is a 10-slot embedded CPU baseplate from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU331 CPU
IC693CPU331 GE Fanuc 90-30 CPU
IC693CPU331 is a modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU341 CPU
IC693CPU341 GE Fanuc 90-30 CPU
IC693CPU341 is a central processing unit module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU350 FANUC
IC693CPU350 GE Fanuc 90-30 CPU
IC693CPU350 is a single-slot CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU351 GE
IC693CPU351 GE Fanuc 90-30 CPU
IC693CPU351 is a single-slot modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU363 FANUC
IC693CPU363 GE Fanuc 90-30 CPU
IC693CPU363 is a CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2024 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies