PLC ENGINEERING

IC694APU305 RX3i PacSystems Series Pulse I/O Processing Module

Home

GE Funac

IC694APU305 RX3i PacSystems Series Pulse I/O Processing Module

IC694APU305 RX3i PacSystems Series Pulse I/O Processing Module

GE Fanuc has designed the RX3i IC694APU305 Pulse I/O Processing Module for the quick processing of pulse train signals without a connection to external PLC or CPU systems. This device is capable of providing DC power for almost any pulse metering electronic device connected into its inputs, but it needs an external power source for powering encoders in motion-controlled systems.

HS CODE : 8428909090

  • Product No :

    IC694APU305
  • Manufacture :

    General Electric
  • Size (cm) :

    13*13*3
  • Weight (kg) :

    1.5
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Module

GE Fanuc has designed and manufactured an I/O processing module that is known as the GE Fanuc RX3i IC694APU305 Pulse I/O Processing Module. It is specifically designed for managing pulse train signals from a wide variety of industrial processes such as flow metering, event counters in motion control applications, and encoder and decoder signal applications. The GE Fanuc IC694APU305 Pulse I/O Processing Module is an additional module for the RX3i product series and it needs to receive a 5V DC power supply from the RX3i backplane to operate adequately. Both the input and the output points are designed with positive logic and they are optically isolated to avoid overcurrent or short circuit-related damages in the module.

There is no limit to how many GE Fanuc IC694APU305 Pulse I/O Processing Modules can connect into a single RX3i system, so any number of pulse signals that need to be monitored can be handled simply by inserting additional modules. The voltage needed to supply power to the circuits connected to the input point can be obtained from the GE Fanuc IC694APU305 Pulse I/O Processing Module itself. Only external encoders need an additional power supply from the end users. The typical input impedance is 4300 Ohms, and the hysteresis is 250 mV. The high-speed counter can properly process a maximum count rate of 30 kHz (when using an absolute encoder) and even a  rate of 200 kHz (when using a Quad B Encoder). The wiring connecting into the inputs should always be shielded to avoid possible noise and interference and it must have a maximum length of 30 meters.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091

 

 

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

 7/24

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

IC693CPU311 GE
IC693CPU311 GE Fanuc 90-30 CPU Base
IC693CPU311 is a 5-slot embedded CPU baseplate manufactured by GE Fanuc that belongs to the Series 90-30 mid-range CPU family. HS CODE : 8538909200
More +
IC693CPU313 BASE
IC693CPU313 GE Fanuc 90-30 CPU Base
IC693CPU313 is an embedded CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU323 FANUC
IC693CPU323 GE Fanuc 90-30 CPU Base
IC693CPU323 is a 10-slot embedded CPU baseplate from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU331 CPU
IC693CPU331 GE Fanuc 90-30 CPU
IC693CPU331 is a modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU341 CPU
IC693CPU341 GE Fanuc 90-30 CPU
IC693CPU341 is a central processing unit module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU350 FANUC
IC693CPU350 GE Fanuc 90-30 CPU
IC693CPU350 is a single-slot CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU351 GE
IC693CPU351 GE Fanuc 90-30 CPU
IC693CPU351 is a single-slot modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU363 FANUC
IC693CPU363 GE Fanuc 90-30 CPU
IC693CPU363 is a CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2024 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies