IC694ACC310 RX3i PacSystems Series Slot Filler Module
The IC694ACC310 is a slot filler module unit that is part of the PACSystem RX3i, formerly by GE Intelligent Platforms (GE IP), now under Emerson Automation. This module is designed to preserve the electronic circuitry by covering the vacant slot. This module is essentially a module case without electronic components.
HS CODE : 8428909090
Product No :
IC694ACC310Manufacture :
General ElectricSize (cm) :
13*13*3Weight (kg) :
1.5Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleThe IC695ACC310 is a Slot filler module that is an accessory component for the PACSystem RX3i Programmable Automation Controller (PAC) Series formerly by GE Intelligent Platforms, currently under Emerson Automation. This module sometimes referred to as a dummy module, slot cover, or a blank module is mainly used to protect the exposed electronic circuitry of a vacant slot from the accumulation of industrial contaminants such as dust and dirt as well as prevent splashes of water, oil, grease, and similar contaminants. In addition, slot covers may provide protection against conductive debris such as metal produced by the drilling operation. The IC695ACC310 covers a single vacant slot and is not required to develop a functioning PACSystem configuration as the IC695ACC310 does not connect to the backplane. This module can be inserted and removed under power however, careful attention to the adjacent modules must be practiced avoiding the adjacent modules from being removed from the respective insertion points. Vacant slots are created when designing a flexible and modular system. For future modifications and system upgrades, vacant slots are left to retain the strategic arrangement of modules. In addition, the IC694ACC310 can be installed on any PACSystem RX3i rack or baseplate such as the main rack, expansion rack, or remote rack. There is no limit to the number of installation instances of the IC694ACC310. The IC694ACC310 physical appearance and measurement are typical to actual I/O modules except that the IC694ACC310 slot filler does not have LED status indicators and individual channel LED indicators. The material of this slot cover module is the same as the materials of I/O modules
The IC694ACC310 module is a blank slot filler module. The IC694ACC310 module is manufactured by GE Fanuc for use in the GE RX3i PacSystem, which is a scalable and high-performance control system which supports the PacSystems engine. This system is rack-based and is built according to the PCI standards. The features of RX3i PacSystems include Profinet for real-time I/O control, Proficy Machine Edition software for the development and configuration of control functions, the PacMotion controller for machine automation, and hot-standby redundancy control. The RX3i Pacsystems baseplates are available in 16, 12, and 7-slot configurations and they support hot-swapping capabilities for downtime reduction. Expansion baseplates are available in 10 and 5-slot versions. The IC694ACC310 module is primarily used for cosmetic purposes.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
