The GE Fanuc IC660TSD100 terminal assembly is manufactured by GE Fanuc. The IC660TSD100 terminal assembly is compatible with the GE IC660BBD100 and IC660BBD101 I/O blocks.
HS CODE : 8428909090
Product No :
IC660TSD100Manufacture :
General ElectricSize (cm) :
10*8.89*22Weight (kg) :
1.8Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleThe IC660TSD100 terminal assembly is a PLC component from GE Fanuc. The IC660TSD100 terminal assembly is designed for use with the IC660BBD100/101 I/O blocks. The IC660BBD100 I/O block is a 115 Volts rated AC block with 8 circuits. The IC660BBD101 I/O block is a 115 Volts AC rated low leakage I/O block with 8 circuits. A GE Fanuc I/O block is comprised of 2 main parts which are the electronic assembly and the terminal assembly like the IC660TSD100. The active components of the I/O block are part of the electronics assembly. The electronics assembly can be changed or replaced without causing any disturbance to the field wiring. All of the field wiring connections for the IC660BBD100/101 I/O blocks are made to the IC660TSD100 terminal assembly. Furthermore, the block configuration data is stored in the EEPROM which is part of the terminal assembly.
The IC660BBD101 I/O block weighs approximately 4 pounds and measures approximately 8.8 x 3.5 x 3.9 inches. The block to block isolation rating is 1500 Volts. The peak heat dissipation is 16 Watts with 8 inputs and 43.5 Watts with 8 outputs operating at 2 Amps. The single-source operating voltage range is 93 to 132 Volts AC. The IC660BBD101 I/O block supports 47 to 63 Hertz frequency. Each circuit on the IC660BBD101 I/O block can be configured as an output, as an input, or as a tristate input. Circuits configured as outputs have 2 Amps RMS output current, 25 Amps peak inrush current, and 15 or 35 Amps peak block output current at 35 or 60 degrees Celsius, respectively. For output circuits, the minimum resistive recommended load is 25 milliamps and the minimum recommended inductive load is 40 milliamps. The operating and storage temperature ranges for the IC660BBD101 I/O block are 32 to 140 degrees Fahrenheit and -40 to 212 degrees Fahrenheit, respectively.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
