IC660TBA105 GE Fanuc Terminal Assembly Module
The IC660TBA105 terminal assembly is made by GE Fanuc and it has 6 current-source outputs. The assembly has an intended voltage of 115 Volts AC or 125 Volts DC and a power supply voltage range of 93 to 132 Volts AC or 105 to 145 Volts DC.
HS CODE : 8428909090
Product No :
IC660TBA105Manufacture :
General ElectricSize (cm) :
10*1.5*22.44Weight (kg) :
1.8Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleThe GE Fanuc terminal assembly that is known as the IC660TBA105 terminal assembly is used in industrial control systems comprised of top-quality components that must operate on high level. The terminal assembly is part of a current-source analog output block and it has different features for its outputs along with diagnostic features that can be of crucial importance. The terminal assembly has output accuracy of 0.15% at a temperature level of 25 degrees Celsius and its fault report feature can be turned on or off for specific circuits. The IC660TBA105 terminal assembly is a GE Genius I/O component that is compatible with bus controllers from the Genius series and it also has the ability to connect with modules such as the PCIM and QBIM. The configuration of the block is performed through a hand-held monitor.
The IC660TBA105 terminal assembly can withstand a vibration of 5 to 10 Hertz with 5.08 millimeters (0.2 inches)of displacement. The relative humidity levels in the operating environment of the terminal should be between 5 and 95%. The unit can be stored at a temperature range of -40 to 100 degrees Celsius or -40 to 212 degrees Fahrenheit. The operating temperature range is 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit. The IC660TBA105 terminal assembly has a rated voltage of 115 Volts AC and 125 Volts DC and it requires a power source with a maximum current of 250 milliamps for AC operation and a maximum current of 140 milliamps for DC operation. The unit has a minimal power supply dropout time of 10 milliseconds and a ripple of 10% maximum. The IC660TBA105 terminal assembly has output signal accuracy of 0.15% when full-scale reading takes place and an update frequency of 25 milliseconds.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
