IC660TBA103 Genius Family Terminal Assembly Block
The IC660TBA103 GENIUS terminal assembly for TBA 103 by GE Fanuc has a rated voltage of 115 Volts AC and 125 Volts DC. This thermocouple block component has a power supply dropout time of 1 cycle (AC) or 10 milliseconds (DC) and a heat dissipation of 9 Watts maximum. The power supply voltage ranges are 93 to 132 Volts AC and 105 to 145 Volts DC. The unit has a block to blAock isolation of 1500 Volts for 1 minute and a group to group isolation of 300 Volts.
HS CODE : 8428909090
Product No :
IC660TBA103Manufacture :
General ElectricSize (cm) :
10*1.5*22.44Weight (kg) :
1.8Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleThe GENIUS terminal assembly with the product code IC660TBA103 is made to be part of a thermocouple block and used for the control of inputs for temperature. This block model includes 6 inputs grouped into 3 identical isolated sets. The terminal is equipped with LED indicators and it dissipates 9 Watts of heat maximum. The IC660TBA103 terminal assembly features 1500 Volts of block to block isolation voltage and 300 Volts of group to group isolation voltage. This component has an input update time of 2 to 3 seconds for all the channels and it includes a variety of diagnostic capabilities. The features of thermocouple block are configurable and they include the baud rate, fault reports, low alarms, high alarms, BSM controllers, and the offset value.
The IC660TBA103 terminal assembly can be configured to respond differently to different errors. The inactive channels of the terminal will not show faults if the users choose to disable the fault detection on them through the "channel active" feature. The terminal can also be adjusted to avoid fault reporting for a particular block circuit so that the fault report will not be sent to the CPU. However, the connected computer will handle the fault even if the fault detection feature is turned off. The IC660TBA103 terminal assembly has a power supply voltage range of 93 to 132 Volts AC and it also supports DC operation in the range of 105 to 145 Volts DC. The dropout time of the unit is 47 to 63 Hertz and the maximum ripple is 10%. The terminal assembly supports the measurement of the voltage at the inputs in the range of -25.0 milliVolts to +150 milliVolts.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
