PLC ENGINEERING

IC660ELB921 Single Slot PC Interface Module (PCIM)

Home

GE Funac

IC660ELB921 Single Slot PC Interface Module (PCIM)

IC660ELB921 Single Slot PC Interface Module (PCIM)

The IC660ELB921 is a single slot PC Interface module (PCIM). This module enables the connection of the host computer to the Genius I/O Bus, allowing monitoring and control functions of Genius I/O devices over the network. It supports the installation of a single daughtercard with catalog number IC660ELB912. This module has a memory requirement of 4 bytes and is mounted to an ISA-compatible slot of the host PC.

HS CODE : 8428909090

  • Product No :

    IC660ELB921
  • Manufacture :

    General Electric
  • Size (cm) :

    14*28*1
  • Weight (kg) :

    0.2
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Module

The IC660ELB921 is a PC Interface Module (PCIM) that is mainly utilized to enable connection to Genius I/O devices residing over Genius I/O Bus, allowing data exchange and controller-like functions implemented by the host controller. This PCIM module is formerly produced by GE Fanuc, currently under Emerson Automation. The IC660ELB921 is a single slot PC interface module supporting the installation of a single daughterboard with catalog number IC660ELB912. This interface module is mounted to the host computer’s ISA Slot and requires 4 bytes of memory from the host device and additional 16 Kbytes for the installed daughtercard. It draws current from the backplane amounting to 400 mA, maximum at 5 VDC, +/- 10%. It has bus loading of 1 LS TTL load per input and Bus drive capability of 10 LS TTL loads per output. This PCIM card is a single slot “AT” styleboard. It provides a connection to an external Hand-Held Monitor (HHM) as well as a Serial bus connection through board edge terminals or external connectors. The IC660ELB921 comes with a status LED indicators such as Daughterboard OK and Communication OK. The operating temperature of the IC660ELB921 is 0–60 C(32–140 F) while the Storage temperature is –40 to +70 C(–40 to 158 F) and relative humidity of 5-95% (non-condensing). It has an operating altitude of 40,00 feet, operating vibration of 0.2-inch displacement, and operating shock of hock 5 G, 10 ms duration. The IC660ELB921 is configured using the PCIM configuration software where the software library providing the high-level interface can be accessed. This software library is supplied in a version compatible with the MSDOS operating system such as C/MSDOS and BASIC/MSDOS.

The IC660ELB921 PC Interface Module is a single-channel PCIM board manufactured by GE Fanuc as part of the Genius I-O series. It can be interfaced to only 1 Genius bus at a time. This module is made for use with the IBM PC, XT, and AT type personal computers. This AT type interface board is also compatible with the different Genius communication protocols as well as with communications timing. The IC660ELB921 PC Interface Module is available with a single daughterboard and with a motherboard. The configuration software which is provided with this module can be used to configure the daughterboard independently of the motherboard. The daughterboard can be connected with a Genius bus device individually and it acts as a general-purpose I/O controller for the I/O system. The IC660ELB921 single-slot PCIM board has an efficient motherboard that connects the daughterboard with IBM-compatible host computers. It is made to buffer all the signals which are needed for communication with the host bus of the system. Some of the daughterboard controls and monitoring facilities provided by the motherboard include ISA-compatible backplanes, detection of low supply voltage levels, address decoding through memory maps, and signal sequencing. Each daughterboard has 2 LEDs for indicating the status of the board and the communication process. The memory requirement of the motherboard is 4 bytes and the requirement for the daughterboard is 16 KB. The IC660ELB921 PC Interface Module is supplied with the configuration software and the PCIM software library that provide a high-level interface between the user-developed software and the PCIM. It uses 5 Volts DC of logic power and it should not vary by more than 10% below or above the nominal level in order for the module to function correctly. During installation, make sure to leave at least 1/8 inch space between this module and other modules to allow proper cooling.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091

 

 

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

 7/24

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

IC693CPU311 GE
IC693CPU311 GE Fanuc 90-30 CPU Base
IC693CPU311 is a 5-slot embedded CPU baseplate manufactured by GE Fanuc that belongs to the Series 90-30 mid-range CPU family. HS CODE : 8538909200
More +
IC693CPU313 BASE
IC693CPU313 GE Fanuc 90-30 CPU Base
IC693CPU313 is an embedded CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU323 FANUC
IC693CPU323 GE Fanuc 90-30 CPU Base
IC693CPU323 is a 10-slot embedded CPU baseplate from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU331 CPU
IC693CPU331 GE Fanuc 90-30 CPU
IC693CPU331 is a modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU341 CPU
IC693CPU341 GE Fanuc 90-30 CPU
IC693CPU341 is a central processing unit module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU350 FANUC
IC693CPU350 GE Fanuc 90-30 CPU
IC693CPU350 is a single-slot CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU351 GE
IC693CPU351 GE Fanuc 90-30 CPU
IC693CPU351 is a single-slot modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU363 FANUC
IC693CPU363 GE Fanuc 90-30 CPU
IC693CPU363 is a CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2024 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies