IC660EBR100 Genius I/O Electronics Assembly Module
The GE Fanuc IC660EBR100 electronics assembly is manufactured by GE Intelligent Platforms/GE Fanuc Automation. It belongs to the Genius I/O block series and it has 16 circuit relay outputs arranged in 4 separate groups with 4 outputs each. The block also has an LED on each of the circuits with an individual relay coil state.
HS CODE : 8428909090
Product No :
IC660EBR100Manufacture :
General ElectricSize (cm) :
10*8.89*22Weight (kg) :
1.8Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleThe IC660EBR100 electronics assembly block is manufactured by the GE Intelligent Platforms/GE Fanuc Automation. It belongs to the Genius I/O series and it features 16 circuit relay outputs that are placed in 4 separate groups of 4 outputs each as well as an LED on each circuit with an individual relay coil state. This electronics assembly has an approximate weight of 1.8 kilograms and it measures 8.83 x 3.50 x 3.94 inches. Its environmental specifications are an operating temperature ranging from 0 to 60 degrees Celsius, and a storage temperature range of -40 to 100 degrees Celsius at a relative humidity range of 5 to 95 percent, non-condensing. The IC660EBR100 electronics assembly block has a nominal voltage rating of 115 Volts AC and an operating voltage range of 93 to 132 volts AC or a nominal voltage rating of 230 Volts AC at an operating voltage of 185 to 265 Volts AC.
The IC660EBR100 electronics assembly block has a power current requirement of 87 milliamps at a voltage of 115 Volts AC, with a power supply dropout time of 1 cycle. It comes with a heat dissipation rating of 10.1 Watts maximum with 16 outputs on. The GE Fanuc IC660EBR100 electronics assembly block has a maximum output current of 2 Amps per circuit, and a maximum switching power of 60 Watts or 125 Volt-Amps. It also has an inrush current of 2 Amps (maximum) for every circuit, with an output off-state leakage current of 0.1 milliamps. It has an all-out switching frequency of 20 cycles in 60 seconds for the inductive loads or an output turn-on delay time of 5 microseconds. The IC660EBR100 electronics assembly block has an output voltage ranging from 5 to 250 Volts AC or 5 to 220 Volts DC, as well as a minimum recommended load of 10 milliamps. It also has a fixed coil moving armature relay type.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
