IC660EBD120 Genius I/O Electronics Assembly Module

The IC660EBD120 is a component of the Genius I/O series, formerly by GE Fanuc Automation, recently acquired by Emerson Automation. This component is specifically an electronics assembly that is paired with the IC660TBD120 terminal base. These components form the I/O block with catalog number IC660BBD120 which is a High-Speed counter Block that accepts high-speed input signal with a switching frequency of up to 200 kHz. This High-Speed counter module is specially designed for use in Turbine Flow metering, meter proving, Velocity measurement, Material handling, and motion control. The IC660EBD120 being an electronics assembly hosts the electronic circuitry that enables module functionality. It is part of the modular approach of the module allowing ser and plant personnel to install, maintain and troubleshoot the module with ease as components can be detached without the need of dismantling existing wires. When installing this electronics assembly, it must be mounted without power. The IC660EBD120 circuitry is designed to accept the input supply voltage range of 93-132 VAC along with a frequency range of 47 - 63 Hz while the input channels are rated 5VDC - 30 VDC and accepts Single-ended TTL, Differential TTL, non TTL single-ended, and non-TTL differential voltage input. This electronics assembly accommodates 12 input and 4 outputs and supports the operation of 1, 2, or 4 counters with different complexity. The electronics assembly has the same operating, storage, relative humidity, and operation vibration requirements as to the Block I/O module which is 0 Degree to 60 Degree Celsius, -40 Degree Celsius to 100 Degree Celsius, 5-95% non-condensing, and 5-10 Hz, 2” or 5.088 displacements, respectively.

The IC660EBD120 electronics assembly is manufactured by GE Fanuc as part of the Genius I/O series. This is part of the high-speed counter module that is self-contained, and it is also a configurable I/O module that offers direct rapid pulse signal processing at up to 200 kilohertz. Some of the typical applications of this electronics assembly block include meter providing, velocity measurement, turbine flowmeter, process control, motion control, and material handling applications. The GE Fanuc IC660EBD120 electronics assembly block operates at 115 Volts AC or 10 to 30 Volts DC. When the block is powered by 115 Volts AC, the 10 to 30 Volts DC power is used as the backup power. Both the AC and DC power can be supplied concurrently when the 115 Volts AC power source fails, and the block can continue operating on the DC reserve power. Any source of DC power which can provide an output within the range of 10 to 30 volts DC can be used to operate the IC660EBD120 electronics assembly block. Nevertheless, these power sources must all adhere to the specifications of the manufacturer. Since the IC660EBD120 electronics assembly block has both AC and DC power sources, its power can be taken from the AC input provided that the DC voltage source does not exceed 20 Volts. This block offers 1, 2, or 4 counters of different complexity levels. When the block has its microprocessor and communication capability activated, it can count and offer outputs without having to communicate with the CPU. The IC660EBD120 electronics assembly block comes with 4 control outputs and it provides an output voltage of 5 Volts DC as well as a square wave oscillator output, which can be used for timing references.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091