PLC ENGINEERING

IC660BBS101 I/O Block

Home

GE Funac

IC660BBS101 I/O Block

IC660BBS101 I/O Block

The GE-Emerson IC660BBS101 Genius Isolated I/O Block is designed for applications where field wiring such as manual switches will be wired in parallel with block outputs.

HS CODE : 8428909090

  • Product No :

    IC660BBS101
  • Manufacture :

    General Electric
  • Size (cm) :

    10*8.89*22.44
  • Weight (kg) :

    1.8
  • Origin :

    USA
  • Warranty :

    12 Month
  • Lead Time :

    Ready Stock
  • Description :

    Module

The IC660BBS101 is an isolated Genius I/O block by GE Fanuc with a power rating of 115 VAC or 125 VDC and an output current of 2 Amps with a frequency of between 47-63 Hz. The block weighs 4 lbs. with a block to block isolation of 1500 Volts. The block is fully compatible with handheld monitor IC660HHM501 and any GE Fanuc bus controller (PCIM or QBIM). Blocks numbered IC660CBS100, 1C660BBS100, and IC660BS101 are backward compatible with previous versions of this Genius I/O block.

The IC660BBS101 block comes with an array of LEDs, each circuit having its own LED. Should the circuit be configured as an input, the corresponding LED will indicate threshold voltage. However, if the circuit is configured to act as an output, the LED will indicate that the circuit is in a state commanded by the CPU. I/O block modules can be configured or set to act as input only, output only, or a combination of the two. The default setting is input only. If configured or set as input only, then all circuits should be set to either regular or tristate inputs. If configured or set as output only, all block circuits should be output only.

The isolated I/O blocks have the capacity to perform diagnostic checks such as over-temperature, absence of a load, sudden shutdown of the I/O block, failed switch, and power overload.  During field wiring, each terminal block can accommodate one AWG #12 or two AWG #14 wires. The minimum recommended wire size AWG #22. Spade or ring terminals of up to 0.27 inches in width can be accommodated by the terminal block. The user can connect a maximum of five power sources to the terminal assembly. 

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091

 

 

Conditions

Original Brand New

Approximate Lead Time

3-5 days

Warranty

One Year

Online Service

 7/24

Express Company

DHL / FedEx / UPS / TNT etc.

MOQ

1 Piece

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Related Products

IC693CPU311 GE
IC693CPU311 GE Fanuc 90-30 CPU Base
IC693CPU311 is a 5-slot embedded CPU baseplate manufactured by GE Fanuc that belongs to the Series 90-30 mid-range CPU family. HS CODE : 8538909200
More +
IC693CPU313 BASE
IC693CPU313 GE Fanuc 90-30 CPU Base
IC693CPU313 is an embedded CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU323 FANUC
IC693CPU323 GE Fanuc 90-30 CPU Base
IC693CPU323 is a 10-slot embedded CPU baseplate from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU331 CPU
IC693CPU331 GE Fanuc 90-30 CPU
IC693CPU331 is a modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU341 CPU
IC693CPU341 GE Fanuc 90-30 CPU
IC693CPU341 is a central processing unit module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU350 FANUC
IC693CPU350 GE Fanuc 90-30 CPU
IC693CPU350 is a single-slot CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU351 GE
IC693CPU351 GE Fanuc 90-30 CPU
IC693CPU351 is a single-slot modular CPU from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
IC693CPU363 FANUC
IC693CPU363 GE Fanuc 90-30 CPU
IC693CPU363 is a CPU module from the GE Fanuc Emerson Series 90-30 line. HS CODE : 8538909200
More +
Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Copyright 2024 @ TZ TECH Co., LTD. .All Rights Reserved Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Sitemap | Blog | XML | Privacy Policy

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

contact

YOUR COOKIE SETTINGS

In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.

Accept and continue Decline cookies