IC660BBA106 GE Fanuc Series 90-30 PLCs Input Block

When power is provided to the block, input channels translate analog current to digital value as whole integers using voltage to frequency converters; after that, they send it to CPU. Input conversion time can be selected to provide the appropriate combination of noise rejection and input resolution. Conversion times are programmable from 16mS to 400mS. Resolution increases as the conversion time is lengthened. Input resolution is 1μA for 200mS conversion time. Upper and lower alarm limits can be programmed for each input circuit. If either limit is exceeded, the block indicates a fault and sends a message to the handheld mnitor, which is required for configuration and control of the IC660BBA106 Current-source Analog Input Block. In each bus scan, the block broadcasts 12 bytes of input data. Each input consists of two bytes of data.

The IC660BBA106 has 32 terminals. Power source connects to terminals 6 and 7. Input cables connect to the self-powered inputs 10 to 32. The bus switching module connects to terminals 8-9. 

Technical Specifications

Rated Voltage: 115 VAC/125 VDC

# of Points: 6

Input Range: 4 mA to 20 mA, 0 mA to 25 mA

Resolution: 1 micro Amp

Operating Voltage: 93-132 VAC / 105-145 VDC

Points per Common:   6 Isolated points

The IC660BBA106 input block from GE Fanuc is an analog input block and a member of the Genius I-O series. It has 6 input channels that are current sourcing inputs and that can all operate within a current range of 4 to 20 milliamps. The IC660BBA106 input block can operate with either a 115 Volts AC rated power supply or with a 125 Volts DC rated power supply. Its operating voltage ranges are 93 to 132 Volts AC and 105 to 145 Volts DC. This analog input block supports channel to channel isolation rated at 1500 Volts RMS. Its input impedance rating is 100 Ohms and it dissipates approximately 12 Watts of heat during normal operation. The ambient operating temperature range for the normal operation of the IC660BBA106 analog input block is from 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit.

The GE Fanuc IC660BBA106 Genius I-O analog input block contains fault-reporting features. These features scan and diagnose the input block automatically and they warn the operators about errors in the system promptly so that the operators can address the errors as quickly as possible to prevent severe or permanent component damage or user injury. The fault-reporting features of the IC660BBA106 analog input block include several alarms and reporting for overrange power levels and underrange power levels. The users can configure and control the IC660BBA106 input block with a compatible handheld monitor or HHM. The handheld monitor is also the device that receives the alarms and alerts that the block’s fault-reporting features generate.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091