IC660BBA105 GE Fanuc Series 90-30 PLCs Output Block

The IC660BBA105 Current-source Analog 6 Output Block has a dedicated bus switching module output that connects to specific BSM devices.

The IC660BBA105 Current-source Analog 6 Output Block can be configured to hold the last output state, or a default state, and can receive output feedback and feedback time.  The circuit transforms the signal to engineering values, and the block can work if there is CPU redundancy.  This equipment also provides fault reporting that can be disabled if needed.  Faults include output over-range and under-range signal detection and feedback recognition of less than 1.5 mA signals.

All Genius bus controllers are compatible with IC660BBA105 Current-source Analog 6 Output Block.  To configure the block, the user needs a handheld monitor of version 3.7 or above.  The programming software is Logicmaster 6 ver.  4.02 or later.  CPUs that are compatible with the block are rev. 105 or later for Series Six PLCs, rev.110 and above for Series Six Plus, and rev. 3.0 or later for series 5 PLCs.  If a bus switching module is required, IC660BSM021 is the only compatible option.

The IC660BBA105 Current-source Analog 6 Output Block has 32 terminals.  Power source connects to terminals 6 and 7.  Output cables connect to the self-powered inputs 11 to 32.  Bus Switching Module connects to terminals 9-10.

Technical Specifications

Rated Voltage: 115 VAC/ 125 VDC

# of Points: 6

Output Range:  4 mA to 20 mA, 0 mA to 24 mA

Resolution: 6 micro Amp

Operating Voltage: 93-132 VAC / 105-145 VDC

Points per Common:   One group of 6

The GE Fanuc IC660BBA105 Analog Current Output Module is a type of I/O module made for the GE Fanuc Series 90-30 PLCs that is designed and manufactured to send a current signal to 6 field devices such as transducers, valves, and other types of current-operated actuators.  The GE Fanuc IC660BBA105 Analog Current Output Module needs a 115 Volts AC or 125 Volts DC rated power supply, and it offers the industrial users 6 current output loops that operate in the most popular current range between 4 and 20 milliamps.  The small dimensions of the device include a height of 8.83 inches (22.44 centimeters), a width of 3.5 inches (8.89 centimeters), and a depth of 3.94 inches (10 centimeters) which, combined with its light weight of only 1.8 kilograms, make it an ideal solution for most crowded panelboard applications.

The GE Fanuc IC660BBA105 Analog Current Output Module has been designed for installation inside a protected panelboard, and its environmental protection rating by itself is only IP 20.  The recommended operating temperature range spans between 0 and 60 degrees Celsius (32 and 140 degrees Fahrenheit).  For higher or lower temperature extremes, climate control systems should be added to the panelboard that is hosting the PLC system.  The GE Fanuc IC660BBA105 Analog Current Output Module can handle a maximum current of 250 milliamps and it comes from the factory with a block-to-block isolation of up to 1500 Volts for 1 minute.  Many applications can be controlled by using this analog current module, so any GE Fanuc Series 90-30 PLC system application would benefit from this output module.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091