IC660BBA025 is a Genius I/O Module developed by GE. It is a part of Mark I and II control system. The GE Intelligent Platforms/GE Fanuc GE-IP Genius I/O is a 24/48 VDC analog current source block designed to offer reliable analog output capabilities. This block features six analog output circuits, each capable of producing a 4 to 20 mA current loop. It requires no calibration for its operation, simplifying its integration into various systems.
HS CODE : 8428909090
Product No :
IC660BBA025Manufacture :
General ElectricSize (cm) :
10*8.89*22.44Weight (kg) :
1.8Origin :
USAWarranty :
12 MonthLead Time :
Ready StockDescription :
ModuleFeatures
Analog Output Circuits: Six outputs support 4 to 20 mA current loops.
Voltage Application Capability: Outputs 5 and 6 can be used for voltage applications.
Internal Power Supply: Powers all circuits internally; no external power is needed for 4 to 20 mA signals.
Current Loop Control: Each output independently manages a 4 to 20-mA current loop.
Advanced Diagnostics: Real-time fault messages can be cleared using a handheld monitor or CPU.
Digital Output: Dedicated output for driving a Bus Switching Module.
Installation and Safety
Protective Enclosure: Must be installed in a protective enclosure to shield from airborne contaminants.
Clean Environment: Ensure the installation area is clean and free from contaminants.
Cooling and Airflow: Ensure adequate cooling and airflow to prevent overheating.
Configuration Process
Handheld Monitor: Use the IC66 HHM501G model (version 4.0 or later) for configuration.
Device Number: Input the device number (serial bus address) into the monitor.
Reference Number: Enter the reference number if required.
Scaling Configuration: Adjust the scaling to set the corresponding output signal values.
Offline Configuration: Properly ground the block and install a 75 Ohm resistor across Serial 1 and 2 terminals if configuring offline.
Maintenance and Troubleshooting
Fault Management: Use advanced diagnostics for real-time fault messages and clear them via the handheld monitor or CPU.
Power Disconnection: Ensure power is disconnected before handling to avoid electrical shock hazards.
Resistor Installation: Install a 75-ohm resistor across Serial 1 and 2 terminals during offline configuration to ensure proper operation.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems RX3i, etc.
Honeywell - Experion® PKS; ControlEdge™ HC900; etc.
Many Available just wait for you, feel free to ask to get better deal!!!
Bou L
Sales Specialist
[email protected]
+86-175 5077 6091
|
Conditions |
Original Brand New |
|
Approximate Lead Time |
3-5 days |
|
Warranty |
One Year |
|
Online Service |
7/24 |
|
Express Company |
DHL / FedEx / UPS / TNT etc. |
|
MOQ |
1 Piece |
TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.
TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Sitemap | Blog | XML | Privacy Policy
In addition, with your permission, we want to place cookies to make your visit anointeraction with slOC more personal. For this we use analytical and advertisingcookies. With these cookies we and third parties can track and collect yourinternet behawior inside and outside super-instrument.com. With this we and third parties adapt super-instrument.com and advertisementsto your interest. By clicking Accept you agree to this. If you decline, we only usethe necessary cookies and you unfortunately will not receive any personalizedcontent. Please visit our Cookie policy for more information or to change yourconsent in the future.
Accept and continue Decline cookies
